Handheld network cable analyser for testing RJ45 (Cat5/5e/6) style network cabling. Connect the Atlas IT cable analyser at one end of your cabling and one of the supplied terminators to the other end. The Atlas IT will then analyse all the lines from one end to the other and identify the connection pattern (such as straight-through, crossover, token-ring, voice/data and many more types). Any wiring faults are clearly displayed including breaks, shorts or swaps. Mini patch cables are also included to enable the testing of RJ45 sockets and their associated cabling. The Atlas IT is compatible with optional "Identified" terminators allowing for the easy analysis and identification of multiple cable runs. Suitable for Cat 5, Cat 5e and Cat 6 cabling with RJ45 style plugs or sockets (shielding not tested). A full colour Ethernet connection chart is included in the user guide. Supplied in a tough padded carry case, spare battery, 2 terminators, 2 patch cables and a user guide. Space is provided in the carry case for up to 24 identified terminators. This instrument does not measure the connection speed capability or cable length.

Features

  • Automatic cable type detection (Straight-through, crossover, Token Ring, voice/data etc)
  • Full connection pattern display from one end to the other.
  • Detection of shorts, breaks and swapped lines.
  • Suitable for RJ45 plugs or sockets (wall sockets or patch panels).
  • Optional cable-run identification when using up to 24 uniquely identified terminators.
  • Displays cable making instructions when not testing cables.

Parameter

 

Notes

Network Cable Category

Cat 5, 5e, 6 (UTP)

 

Connection Type

RJ45, 8 pin.

 

Maximum Cable Length

150 metres (500 feet)

1

Test Voltage

±5V

 

Test Current

±2.5mA

 

Protection Rating

±15V

2

 

±80V

3

Operating Temperature Range

10°C to 50°C

4

 50°F to 122°F 

Battery Voltage Range

7.0V to 13.0V

 

Battery Type

GP23A 12V Alkaline

 

Atlas IT Dimensions

103 x 70 x 20 mm

 

 4.1" x 2.8" x 0.8" 

Terminator Dimensions

18 x 15 x 14 mm

 

 0.7" x 0.6" x 0.6" 
Carry Case Dimensions268 x 225 x 55 mm 
 10.6" x 8.9" x 2.2" 
  1. Dependant on quality of cable, connections and influence of external interference.

  2. Specified for durations no longer than 60 seconds.

  3. Specified for durations no longer than 15 seconds.

  4.       Subject to acceptable LCD visibility.

Write a review

Note: HTML is not translated!
    Bad           Good

Peak Atlas IT Network Cable Analyser Model UTP05

  • €80.00

  • Price in reward points: 2000

Related Products

Peak Atlas ESR70 ESR and Capacitance Meter with Audible Alerts

Peak Atlas ESR70 ESR and Capacitance Meter with Audible Alerts

The Atlas ESR PLUS measures both the capacitance and Equivalent Series Resistance (ESR) of a capacit..

€90.00

Peak Atlas ZEN50 Zener Diode Analyser (0-50V)

Peak Atlas ZEN50 Zener Diode Analyser (0-50V)

Test Zeners, Avalanche Diodes, VDRs, TVSs, LED strings and much more (up to 50V!)Key Features:Measur..

€45.00

Peak Atlas LCR45 LCR Meter (with component impedance measurement)

Peak Atlas LCR45 LCR Meter (with component impedance measurement)

A great handheld LCR analyser that can measure the value of your passive component (inductor, capaci..

€80.00

Peak Atlas Instrument Case

Peak Atlas Instrument Case

A high quality carry case to protect your Peak Atlas instrument with some space for accessories too...

€10.00